Hi All,
i am getting the below error after adding cisco switches. kindly suggest . All interfaces got discovered but getting alerts on all interfaces.
no output on stdout) stderr:/bin/sh:- c:line 0 syntax error near unexpected token
Bulk Warning Alerts
-
dwhitfield
- Former Nagios Staff
- Posts: 4583
- Joined: Wed Sep 21, 2016 10:29 am
- Location: NoLo, Minneapolis, MN
- Contact:
Re: Bulk Warning Alerts
I suspect you are missing a " or have too many " in your command in XI. Could you please attach a screenshot of how the command is set up in the CCM?
Also, can you PM me your Profile? You can download it by going to Admin > System Config > System Profile and click the ***Download Profile*** button towards the top. If for whatever reason you *cannot* download the profile, please put the output of View System Info (5.3.4+, Show Profile if older) in the thread (that will at least get us some info). This will give us access to many of the logs we would otherwise ask for individually. If security is a concern, you can unzip the profile take out what you like, and then zip it up again. We may end up needing something you remove, but we can ask for that specifically.
After you PM the profile, please update this thread. Updating this thread is the only way for it to show back up on our dashboard.
Also, can you PM me your Profile? You can download it by going to Admin > System Config > System Profile and click the ***Download Profile*** button towards the top. If for whatever reason you *cannot* download the profile, please put the output of View System Info (5.3.4+, Show Profile if older) in the thread (that will at least get us some info). This will give us access to many of the logs we would otherwise ask for individually. If security is a concern, you can unzip the profile take out what you like, and then zip it up again. We may end up needing something you remove, but we can ask for that specifically.
After you PM the profile, please update this thread. Updating this thread is the only way for it to show back up on our dashboard.
Re: Bulk Warning Alerts
I didn't set any command in CCM..
-
dwhitfield
- Former Nagios Staff
- Posts: 4583
- Joined: Wed Sep 21, 2016 10:29 am
- Location: NoLo, Minneapolis, MN
- Contact:
Re: Bulk Warning Alerts
You may need to read the entire document for context, but there is a screenshot on page 6 of https://assets.nagios.com/downloads/nag ... ios-XI.pdf
I would highly suggest going through our manual as it has links to many PDFs such as the one above: https://library.nagios.com/library/prod ... i/manuals/
Can you PM me your Profile? You can download it by going to Admin > System Config > System Profile and click the ***Download Profile*** button towards the top. If for whatever reason you *cannot* download the profile, please put the output of View System Info (5.3.4+, Show Profile if older) in the thread (that will at least get us some info). This will give us access to many of the logs we would otherwise ask for individually. If security is a concern, you can unzip the profile take out what you like, and then zip it up again. We may end up needing something you remove, but we can ask for that specifically.
After you PM the profile, please update this thread. Updating this thread is the only way for it to show back up on our dashboard.
I would highly suggest going through our manual as it has links to many PDFs such as the one above: https://library.nagios.com/library/prod ... i/manuals/
Can you PM me your Profile? You can download it by going to Admin > System Config > System Profile and click the ***Download Profile*** button towards the top. If for whatever reason you *cannot* download the profile, please put the output of View System Info (5.3.4+, Show Profile if older) in the thread (that will at least get us some info). This will give us access to many of the logs we would otherwise ask for individually. If security is a concern, you can unzip the profile take out what you like, and then zip it up again. We may end up needing something you remove, but we can ask for that specifically.
After you PM the profile, please update this thread. Updating this thread is the only way for it to show back up on our dashboard.