Nagios Support Forum

Code: Select all

define service{
use        generic-service
host_name        sol
service_description        Firewall
check_command        check_nt!SERVICESTATE!-d SHOWALL -l MpsSvc
check_period        24x7
notifications_enabled        1
notification_interval        0
notification_period        24x7
notification_options        w,c,r
contacts        nagiosadmin
}

Code: Select all

# If you want to fill this file with all available options run the following command:
#   nscp settings --generate --add-defaults --load-all
# If you want to activate a module and bring in all its options use:
#   nscp settings --activate-module <MODULE NAME> --add-defaults
# For details run: nscp settings --help


; TODO
[/settings/default]

; Undocumented key
password = password

; Undocumented key
allowed hosts = 127.0.0.1,::1,+IP of my VM

; CACHE ALLOWED HOSTS - If host names (DNS entries) should be cached, improves speed and security somewhat but won't allow you to have dynamic IPs for your Nagios server.
cache allowed hosts = 1

; TIMEOUT - Timeout when reading packets on incoming sockets. If the data has not arrived within this time we will bail out.
timeout = 30


; TODO
[/settings/NSClient/server]

; ENABLE SSL ENCRYPTION - This option controls if SSL should be enabled.
use ssl = 0

; PERFORMANCE DATA - Send performance data back to Nagios (set this to 0 to remove all performance data).
performance data = 1

; PORT NUMBER - Port to use for check_nt.
port = 12489

; TODO
[/settings/NRPE/server]

; Undocumented key
verify mode = none

; Undocumented key
insecure = true

; PORT NUMBER - Port to use for NRPE.
port = 5666

; COMMAND ALLOW NASTY META CHARS - This option determines whether or not the we will allow clients to specify nasty (as in |`&><'"\[]{}) characters in arguments.
allow nasty characters = 0

; EXTENDED RESPONSE - Send more then 1 return packet to allow response to go beyond payload size (requires modified client if legacy is true this defaults to false).
extended response = 0

; COMMAND ARGUMENT PROCESSING - This option determines whether or not the we will allow clients to specify arguments to commands that are executed.
allow arguments = true

; ENABLE SSL ENCRYPTION - This option controls if SSL should be enabled.
use ssl = 1


; TODO
[/modules]
Scheduler = 1
; Undocumented key
CheckExternalScripts = 1

; Undocumented key
CheckHelpers = 1

; Undocumented key
NSClientServer = 1

; Undocumented key
CheckNSCP = 1

; Undocumented key
CheckDisk = 1

; Undocumented key
CheckSystem = 1

; Undocumented key
CheckEventLog = 1

; Undocumented key
NSCAClient = 1

; Undocumented key
WEBSErver = 1

; Undocumented key
NRPEServer = 1


; A set of options to configure the real time checks
[/settings/system/windows/real-time]


; Configure which services has to be in which state
[/settings/system/windows/service mapping]


; TODO
[/settings/system/windows/counters/default]


; TODO
[/settings/system/windows/counters]


; TODO
[/settings/log/file]


; TODO
[/settings/log]

; LOG LEVEL - Log level to use. Available levels are error,warning,info,debug,trace
level = info

; DATEMASK - The size of the buffer to use when getting messages this affects the speed and maximum size of messages you can recieve.
date format = %Y-%m-%d %H:%M:%S

; FILENAME - The file to write log data to. Set this to none to disable log to file.
file name = ${exe-path}/nsclient.log


; TODO
[/settings/system/windows]

; DEFAULT LENGTH - Used to define the default interval for range buffer checks (ie. CPU).
default buffer length = 1h


; TODO
[/settings/external scripts/scripts/default]

; IGNORE PERF DATA - Do not parse performance data from the output
ignore perfdata = 0


; A list of scripts available to run from the CheckExternalScripts module. Syntax is: <command>=<script> <arguments>
[/settings/external scripts/scripts]


; A list of wrapped scripts (ie. scruts using a template mechanism). The template used will be defined by the extension of the script.
[/settings/external scripts/wrapped scripts]


; TODO
[/settings/external scripts/alias]


; TODO
[/settings/eventlog/real-time/filters/default]

; EMPTY MESSAGE - The message to display if nothing matches the filter (generally considered the ok state).
empty message = eventlog found no records

; MAGIMUM AGE - How long before reporting "ok". If this is set to "false" no periodic ok messages will be reported only errors.
maximum age = 5m


; A set of filters to use in real-time mode
[/settings/eventlog/real-time/filters]


; TODO
[/settings/external scripts/alias/default]


; TODO
[/settings/shared session]


; TODO
[/settings/crash]

; RESTART SERVICE NAME - The url to submit crash reports to
restart target = NSCP

; CRASH ARCHIVE LOCATION - The folder to archive crash dumps in
archive folder = ${crash-folder}

; RESTART - Submit crash reports to nsclient.org (or your configured submission server)
restart = true

; SUBMISSION URL - The url to submit crash reports to
submit url = https://crash.nsclient.org/post

; ARCHIVE CRASHREPORTS - Archive crash reports in the archive folder
archive = true


; TODO
[/settings/eventlog/real-time]

; STARTUP AGE - The initial age to scan when starting NSClient++
startup age = 30m

; REAL TIME CHECKING - Spawns a background thread which detects issues and reports them back instantly.
enabled = 0

; LOGS TO CHECK - Comma separated list of logs to check
log = application,system

; DEBUG - Log missed records (useful to detect issues with filters) not useful in production as it is a bit of a resource hog.
debug = 0


; TODO
[/settings/NSCA/client/targets/default]

; TIMEOUT - Timeout when reading/writing packets to/from sockets.
timeout = 30

; RETRIES - Number of times to retry sending.
retries = 3

; ENCRYPTION - Name of encryption algorithm to use. Has to be the same as your server i using or it wont work at all.This is also independent of SSL and generally used instead of SSL. Available encryption algorithms are: none = No Encryption (not safe) xor = XOR des = DES 3des = DES-EDE3 cast128 = CAST-128 xtea = XTEA blowfish = Blowfish twofish = Twofish rc2 = RC2 aes128 = AES aes192 = AES aes = AES serpent = Serpent gost = GOST
encryption = aes

; ENABLE SSL ENCRYPTION - This option controls if SSL should be enabled.
use ssl = 0


; A set of filters to use in real-time mode
[/settings/system/windows/real-time/checks]


; TODO
[/settings/NSCA/client]

; HOSTNAME - The host name of the monitored computer. Set this to auto (default) to use the windows name of the computer.  auto	Hostname ${host}	Hostname ${host_lc} Hostname in lowercase ${host_uc}	Hostname in uppercase ${domain}	Domainname ${domain_lc}	Domainname in lowercase ${domain_uc}	Domainname in uppercase 
hostname = auto

; CHANNEL - The channel to listen to.
channel = NSCA


; TODO
[/settings/external scripts]

; COMMAND TIMEOUT - The maximum time in seconds that a command can execute. (if more then this execution will be aborted). NOTICE this only affects external commands not internal ones.
timeout = 60

; COMMAND ALLOW NASTY META CHARS - This option determines whether or not the we will allow clients to specify nasty (as in |`&><'"\[]{}) characters in arguments.
allow nasty characters = true

; COMMAND ARGUMENT PROCESSING - This option determines whether or not the we will allow clients to specify arguments to commands that are executed.
allow arguments = true


; TODO
[/paths]

; Path for shared-path - 
shared-path = C:\Program Files\NSClient++

; Path for module-path - 
module-path = ${shared-path}/modules

; Path for crash-folder - 
crash-folder = ${shared-path}/crash-dumps

; Path for exe-path - 
exe-path = C:\Program Files\NSClient++

; Path for certificate-path - 
certificate-path = ${shared-path}/security

; Path for base-path - 
base-path = C:\Program Files\NSClient++


; TODO
[/settings/WEB/server]

; PORT NUMBER - Port to use for WEB server.
port = 8443s

; CERTIFICATE - Ssl certificate to use for the ssl server
certificate = ${certificate-path}/certificate.pem


; Files to be included in the configuration
[/includes]


; TODO
[/settings/eventlog]

; LOOKUP NAMES - Lookup the names of eventlog files
lookup names = 1

; BUFFER_SIZE - The size of the buffer to use when getting messages this affects the speed and maximum size of messages you can recieve.
buffer size = 131072

; DEBUG - Log more information when filtering (useful to detect issues with filters) not useful in production as it is a bit of a resource hog.
debug = 0


; TODO
[/settings/external scripts/wrappings]

; BATCH FILE WRAPPING - 
bat = scripts\\%SCRIPT% %ARGS%

; VISUAL BASIC WRAPPING - 
vbs = cscript.exe //T:30 //NoLogo scripts\\lib\\wrapper.vbs %SCRIPT% %ARGS%

; POWERSHELL WRAPPING - 
ps1 = cmd /c echo If (-Not (Test-Path "scripts\%SCRIPT%") ) { Write-Host "UNKNOWN: Script `"%SCRIPT%`" not found."; exit(3) }; scripts\%SCRIPT% $ARGS$; exit($lastexitcode) | powershell.exe /noprofile -command -


; TODO
[/settings/scheduler]

; THREAD COUNT - Number of threads to use.
threads = 5

Code: Select all

# If you want to fill this file with all available options run the following command:
#   nscp settings --generate --add-defaults --load-all
# If you want to activate a module and bring in all its options use:
#   nscp settings --activate-module <MODULE NAME> --add-defaults
# For details run: nscp settings --help


; TODO
[/settings/default]

; Undocumented key
password = mdp

; Undocumented key
allowed hosts = 127.0.0.1,::1,127.0.0.1,::1,+IpOfVM
; CACHE ALLOWED HOSTS - If host names (DNS entries) should be cached, improves speed and security somewhat but won't allow you to have dynamic IPs for your Nagios server.
cache allowed hosts = 1

; TIMEOUT - Timeout when reading packets on incoming sockets. If the data has not arrived within this time we will bail out.
timeout = 30

; TODO
[NSClient]

allowed_hosts=127.0.0.1,::1,+IpOfVM
port=12489
bind_to_address=
socket_timeout=30


; TODO
[/settings/NSClient/server]

; ENABLE SSL ENCRYPTION - This option controls if SSL should be enabled.
use ssl = 0

; PERFORMANCE DATA - Send performance data back to Nagios (set this to 0 to remove all performance data).
performance data = 1

; PORT NUMBER - Port to use for check_nt.
port = 12489

; TODO
[/settings/NRPE/server]

; Undocumented key
verify mode = none

; Undocumented key
insecure = true


; TODO
[/modules]

; Undocumented key
CheckExternalScripts = 1

; Undocumented key
CheckHelpers = 1

; Undocumented key
CheckEventLog = 1

; Undocumented key
CheckNSCP = 1

; Undocumented key
CheckDisk = 1

; Undocumented key
CheckSystem = 1

; Undocumented key
NRPEServer = 1