Page 1 of 2
Hosts still showing up after "restore_defaults.sh"
Posted: Thu Nov 08, 2018 3:51 am
by MattXI
Hello,
Nagios XI manually installed on RedHat 7
I am trying to clean up a Nagios XI server from all its hosts so I can reconfigure from ground up.
I ran /usr/local/nagiosxi/scripts/restore_defaults.sh and it went okay. Now the CCM only shows "localhost" which is what I want.
Problem is that I still have all my 500+ hosts showing up in Nagios XI dashboard.
If I try to delete a host, I get the following error :
Could not find a unique id for this host
Host cannot be deleted using this method
I have no idea of what's going on here, did I miss something or is my Nagios broken ?
Could you please help me removing all these hosts ?
Regards.
Re: Hosts still showing up after "restore_defaults.sh"
Posted: Thu Nov 08, 2018 8:30 am
by scottwilkerson
This should remove all the old configs
CCM -> Tools -> Config File Management
Delete Files
Write Configs
Verify Files
Restart Nagios Core
Re: Hosts still showing up after "restore_defaults.sh"
Posted: Thu Nov 08, 2018 9:14 am
by MattXI
Thanks for the answer. I did just that and it went fine but my 500+ hosts are still there.
Note that I went to "system status" and the line "Monitoring Engine" has red status : no lock file found in /usr/local/nagios/var/nagios.lock
This file exists on the server and inside there's nagios PID (the process is up and running)
Action -> start on this service says that my request did not process in a timely manner.
I rebooted the server but everything stays the same. Something is wrong but I don't know what it is.
Here's an extract from nagios.log :
Code: Select all
[1541685393] Nagios 4.2.4 starting... (PID=1775)
[1541685393] Local time is Thu Nov 08 14:56:33 CET 2018
[1541685393] LOG VERSION: 2.0
[1541685393] qh: Socket '/usr/local/nagios/var/rw/nagios.qh' successfully initialized
[1541685393] qh: core query handler registered
[1541685393] nerd: Channel hostchecks registered successfully
[1541685393] nerd: Channel servicechecks registered successfully
[1541685393] nerd: Channel opathchecks registered successfully
[1541685393] nerd: Fully initialized and ready to rock!
[1541685393] wproc: Successfully registered manager as @wproc with query handler
[1541685393] wproc: Registry request: name=Core Worker 1780;pid=1780
[1541685393] wproc: Registry request: name=Core Worker 1783;pid=1783
[1541685393] wproc: Registry request: name=Core Worker 1782;pid=1782
[1541685393] wproc: Registry request: name=Core Worker 1781;pid=1781
[1541685393] ndomod: NDOMOD 2.1.2 (11-14-2016) Copyright (c) 2009 Nagios Core Development Team and Community Contributors
[1541685393] ndomod: Could not open data sink! I'll keep trying, but some output may get lost...
[1541685393] ndomod registered for process data
[1541685393] ndomod registered for log data'
[1541685393] ndomod registered for system command data'
[1541685393] ndomod registered for event handler data'
[1541685393] ndomod registered for notification data'
[1541685393] ndomod registered for comment data'
[1541685393] ndomod registered for downtime data'
[1541685393] ndomod registered for flapping data'
[1541685393] ndomod registered for program status data'
[1541685393] ndomod registered for host status data'
[1541685393] ndomod registered for service status data'
[1541685393] ndomod registered for adaptive program data'
[1541685393] ndomod registered for adaptive host data'
[1541685393] ndomod registered for adaptive service data'
[1541685393] ndomod registered for external command data'
[1541685393] ndomod registered for aggregated status data'
[1541685393] ndomod registered for retention data'
[1541685393] ndomod registered for contact data'
[1541685393] ndomod registered for contact notification data'
[1541685393] ndomod registered for acknowledgement data'
[1541685393] ndomod registered for state change data'
[1541685393] ndomod registered for contact status data'
[1541685393] ndomod registered for adaptive contact data'
[1541685393] Event broker module '/usr/local/nagios/bin/ndomod.o' initialized successfully.
[1541685399] Successfully launched command file worker with pid 2061
[1541686294] ndomod: Still unable to connect to data sink. 1032 items lost, 5000 queued items to flush.
Re: Hosts still showing up after "restore_defaults.sh"
Posted: Thu Nov 08, 2018 9:28 am
by scottwilkerson
Lets run the following
Code: Select all
service nagios stop
service ndo2db stop
killall -9 nagios
rm -f /usr/local/nagios/var/ndo* /usr/local/nagios/var/nagios.lock
service ndo2db start
service nagios start
Re: Hosts still showing up after "restore_defaults.sh"
Posted: Thu Nov 08, 2018 9:43 am
by MattXI
The dashboard looks much better indeed ! Only localhost is displayed there.
For some reason the system status still complains about the lockfile and my nagios commands (force check for example) are still not processed.
Re: Hosts still showing up after "restore_defaults.sh"
Posted: Thu Nov 08, 2018 9:53 am
by scottwilkerson
What is the output of the following commands:
Code: Select all
grep nagios.lock /etc/init.d/nagios
grep nagios.lock /usr/local/nagios/etc/nagios.cfg
ls -al /usr/local/nagios/var/rw/
Re: Hosts still showing up after "restore_defaults.sh"
Posted: Mon Nov 12, 2018 3:12 am
by MattXI
Sorry I was ooo last Friday. Here's the output :
Code: Select all
# grep nagios.lock /etc/init.d/nagios
# pidfile: /usr/local/nagios/var/nagios.lock
NagiosRunFile=${prefix}/var/nagios.lock
# grep nagios.lock /usr/local/nagios/etc/nagios.cfg
lock_file=/usr/local/nagios/var/nagios.lock
# ls -al /usr/local/nagios/var/rw/
total 8
drwsrwsr-x. 2 nagios nagcmd 4096 Nov 8 15:33 .
drwxrwxr-x. 6 nagios nagios 4096 Nov 12 09:10 ..
prw-rw---- 1 nagios nagcmd 0 Nov 8 15:33 nagios.cmd
srw-rw---- 1 nagios nagcmd 0 Nov 8 15:33 nagios.qh
# cat /usr/local/nagios/var/nagios.lock
8719
Re: Hosts still showing up after "restore_defaults.sh"
Posted: Mon Nov 12, 2018 3:35 pm
by tgriep
Can you run a Nagios verification command and a process commands and post the output to the ticket?
Run these as root.
Code: Select all
/usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg
ps -ef --cols=300
Also, what version of XI is the server running and can you post the full error message you are receiving?
Thanks
Re: Hosts still showing up after "restore_defaults.sh"
Posted: Wed Nov 14, 2018 2:37 am
by MattXI
Here's the output :
Code: Select all
# /usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg
Nagios Core 4.2.4
Copyright (c) 2009-present Nagios Core Development Team and Community Contributors
Copyright (c) 1999-2009 Ethan Galstad
Last Modified: 12-07-2016
License: GPL
Website: https://www.nagios.org
Reading configuration data...
Read main config file okay...
Read object config files okay...
Running pre-flight check on configuration data...
Checking objects...
Checked 14 services.
Checked 1 hosts.
Checked 1 host groups.
Checked 0 service groups.
Checked 2 contacts.
Checked 2 contact groups.
Checked 124 commands.
Checked 8 time periods.
Checked 0 host escalations.
Checked 0 service escalations.
Checking for circular paths...
Checked 1 hosts
Checked 0 service dependencies
Checked 0 host dependencies
Checked 8 timeperiods
Checking global event handlers...
Checking obsessive compulsive processor commands...
Checking misc settings...
Total Warnings: 0
Total Errors: 0
Things look okay - No serious problems were detected during the pre-flight check
Code: Select all
# ps -ef --cols=300
UID PID PPID C STIME TTY TIME CMD
root 1 0 0 Nov08 ? 00:02:04 /usr/lib/systemd/systemd --switched-root --system --deserialize 21
root 2 0 0 Nov08 ? 00:00:00 [kthreadd]
root 3 2 0 Nov08 ? 00:00:00 [ksoftirqd/0]
root 5 2 0 Nov08 ? 00:00:00 [kworker/0:0H]
root 7 2 0 Nov08 ? 00:00:01 [migration/0]
root 8 2 0 Nov08 ? 00:00:00 [rcu_bh]
root 9 2 0 Nov08 ? 00:00:20 [rcu_sched]
root 10 2 0 Nov08 ? 00:00:00 [lru-add-drain]
root 11 2 0 Nov08 ? 00:00:01 [watchdog/0]
root 12 2 0 Nov08 ? 00:00:01 [watchdog/1]
root 13 2 0 Nov08 ? 00:00:01 [migration/1]
root 14 2 0 Nov08 ? 00:00:01 [ksoftirqd/1]
root 16 2 0 Nov08 ? 00:00:00 [kworker/1:0H]
root 18 2 0 Nov08 ? 00:00:00 [kdevtmpfs]
root 19 2 0 Nov08 ? 00:00:00 [netns]
root 20 2 0 Nov08 ? 00:00:00 [khungtaskd]
root 21 2 0 Nov08 ? 00:00:00 [writeback]
root 22 2 0 Nov08 ? 00:00:00 [kintegrityd]
root 23 2 0 Nov08 ? 00:00:00 [bioset]
root 24 2 0 Nov08 ? 00:00:00 [kblockd]
root 25 2 0 Nov08 ? 00:00:00 [md]
root 26 2 0 Nov08 ? 00:00:00 [edac-poller]
root 32 2 0 Nov08 ? 00:00:00 [kswapd0]
root 33 2 0 Nov08 ? 00:00:00 [ksmd]
root 34 2 0 Nov08 ? 00:00:01 [khugepaged]
root 35 2 0 Nov08 ? 00:00:00 [crypto]
root 43 2 0 Nov08 ? 00:00:00 [kthrotld]
root 45 2 0 Nov08 ? 00:00:00 [kmpath_rdacd]
root 46 2 0 Nov08 ? 00:00:00 [kaluad]
root 48 2 0 Nov08 ? 00:00:00 [kpsmoused]
root 62 2 0 Nov08 ? 00:00:00 [deferwq]
root 92 2 0 Nov08 ? 00:00:01 [kauditd]
root 228 2 0 Nov08 ? 00:00:00 [scsi_eh_0]
root 229 2 0 Nov08 ? 00:00:00 [ata_sff]
root 230 2 0 Nov08 ? 00:00:00 [scsi_tmf_0]
root 231 2 0 Nov08 ? 00:00:00 [scsi_eh_1]
root 232 2 0 Nov08 ? 00:00:00 [scsi_tmf_1]
root 233 2 0 Nov08 ? 00:00:00 [scsi_eh_2]
root 234 2 0 Nov08 ? 00:00:00 [scsi_tmf_2]
root 237 2 0 Nov08 ? 00:00:00 [vmw_pvscsi_wq_0]
root 241 2 0 Nov08 ? 00:00:00 [scsi_eh_3]
root 242 2 0 Nov08 ? 00:00:00 [scsi_tmf_3]
root 243 2 0 Nov08 ? 00:00:00 [scsi_eh_4]
root 244 2 0 Nov08 ? 00:00:00 [scsi_tmf_4]
root 245 2 0 Nov08 ? 00:00:00 [scsi_eh_5]
root 246 2 0 Nov08 ? 00:00:00 [scsi_tmf_5]
root 247 2 0 Nov08 ? 00:00:00 [scsi_eh_6]
root 248 2 0 Nov08 ? 00:00:00 [scsi_tmf_6]
root 249 2 0 Nov08 ? 00:00:00 [scsi_eh_7]
root 250 2 0 Nov08 ? 00:00:00 [scsi_tmf_7]
root 251 2 0 Nov08 ? 00:00:00 [scsi_eh_8]
root 252 2 0 Nov08 ? 00:00:00 [scsi_tmf_8]
root 253 2 0 Nov08 ? 00:00:00 [scsi_eh_9]
root 254 2 0 Nov08 ? 00:00:00 [scsi_tmf_9]
root 255 2 0 Nov08 ? 00:00:00 [scsi_eh_10]
root 256 2 0 Nov08 ? 00:00:00 [scsi_tmf_10]
root 257 2 0 Nov08 ? 00:00:00 [scsi_eh_11]
root 258 2 0 Nov08 ? 00:00:00 [scsi_tmf_11]
root 259 2 0 Nov08 ? 00:00:00 [scsi_eh_12]
root 260 2 0 Nov08 ? 00:00:00 [scsi_tmf_12]
root 261 2 0 Nov08 ? 00:00:00 [scsi_eh_13]
root 262 2 0 Nov08 ? 00:00:00 [scsi_tmf_13]
root 263 2 0 Nov08 ? 00:00:00 [scsi_eh_14]
root 264 2 0 Nov08 ? 00:00:00 [scsi_tmf_14]
root 265 2 0 Nov08 ? 00:00:00 [scsi_eh_15]
root 266 2 0 Nov08 ? 00:00:00 [scsi_tmf_15]
root 267 2 0 Nov08 ? 00:00:00 [scsi_eh_16]
root 268 2 0 Nov08 ? 00:00:00 [scsi_tmf_16]
root 269 2 0 Nov08 ? 00:00:00 [scsi_eh_17]
root 270 2 0 Nov08 ? 00:00:00 [scsi_tmf_17]
root 271 2 0 Nov08 ? 00:00:00 [scsi_eh_18]
root 272 2 0 Nov08 ? 00:00:00 [scsi_tmf_18]
root 273 2 0 Nov08 ? 00:00:00 [scsi_eh_19]
root 274 2 0 Nov08 ? 00:00:00 [scsi_tmf_19]
root 275 2 0 Nov08 ? 00:00:00 [scsi_eh_20]
root 276 2 0 Nov08 ? 00:00:00 [scsi_tmf_20]
root 277 2 0 Nov08 ? 00:00:00 [scsi_eh_21]
root 278 2 0 Nov08 ? 00:00:00 [scsi_tmf_21]
root 279 2 0 Nov08 ? 00:00:00 [scsi_eh_22]
root 280 2 0 Nov08 ? 00:00:00 [scsi_tmf_22]
root 281 2 0 Nov08 ? 00:00:00 [scsi_eh_23]
root 282 2 0 Nov08 ? 00:00:00 [scsi_tmf_23]
root 283 2 0 Nov08 ? 00:00:00 [scsi_eh_24]
root 284 2 0 Nov08 ? 00:00:00 [scsi_tmf_24]
root 285 2 0 Nov08 ? 00:00:00 [scsi_eh_25]
root 286 2 0 Nov08 ? 00:00:00 [scsi_tmf_25]
root 287 2 0 Nov08 ? 00:00:00 [scsi_eh_26]
root 288 2 0 Nov08 ? 00:00:00 [scsi_tmf_26]
root 289 2 0 Nov08 ? 00:00:00 [scsi_eh_27]
root 290 2 0 Nov08 ? 00:00:00 [scsi_tmf_27]
root 291 2 0 Nov08 ? 00:00:00 [scsi_eh_28]
root 292 2 0 Nov08 ? 00:00:00 [scsi_tmf_28]
root 293 2 0 Nov08 ? 00:00:00 [scsi_eh_29]
root 294 2 0 Nov08 ? 00:00:00 [scsi_tmf_29]
root 295 2 0 Nov08 ? 00:00:00 [scsi_eh_30]
root 296 2 0 Nov08 ? 00:00:00 [scsi_tmf_30]
root 297 2 0 Nov08 ? 00:00:00 [scsi_eh_31]
root 299 2 0 Nov08 ? 00:00:00 [scsi_tmf_31]
root 300 2 0 Nov08 ? 00:00:00 [scsi_eh_32]
root 301 2 0 Nov08 ? 00:00:00 [scsi_tmf_32]
root 372 2 0 Nov08 ? 00:00:01 [kworker/0:1H]
root 424 2 0 Nov08 ? 00:00:00 [kdmflush]
root 425 2 0 Nov08 ? 00:00:00 [bioset]
root 435 2 0 Nov08 ? 00:00:00 [kdmflush]
root 436 2 0 Nov08 ? 00:00:00 [bioset]
root 450 2 0 Nov08 ? 00:00:00 [jbd2/dm-0-8]
root 451 2 0 Nov08 ? 00:00:00 [ext4-rsv-conver]
root 480 2 0 Nov08 ? 00:00:10 [jbd2/dm-1-8]
root 481 2 0 Nov08 ? 00:00:00 [ext4-rsv-conver]
root 513 1 0 Nov08 ? 00:01:08 /usr/lib/systemd/systemd-journald
root 540 1 0 Nov08 ? 00:00:00 /usr/lib/systemd/systemd-udevd
root 541 1 0 Nov08 ? 00:00:00 /usr/sbin/lvmetad -f
root 560 2 0 Nov08 ? 00:00:00 [ttm_swap]
root 561 2 0 Nov08 ? 00:00:00 [irq/16-vmwgfx]
root 565 2 0 Nov08 ? 00:00:00 [nfit]
root 644 2 0 Nov08 ? 00:00:00 [bioset]
root 645 2 0 Nov08 ? 00:00:00 [xfsalloc]
root 646 2 0 Nov08 ? 00:00:00 [xfs_mru_cache]
root 647 2 0 Nov08 ? 00:00:00 [xfs-buf/sda1]
root 648 2 0 Nov08 ? 00:00:00 [xfs-data/sda1]
root 649 2 0 Nov08 ? 00:00:00 [xfs-conv/sda1]
root 650 2 0 Nov08 ? 00:00:00 [xfs-cil/sda1]
root 651 2 0 Nov08 ? 00:00:00 [xfs-reclaim/sda]
root 652 2 0 Nov08 ? 00:00:00 [xfs-log/sda1]
root 653 2 0 Nov08 ? 00:00:00 [xfs-eofblocks/s]
root 654 2 0 Nov08 ? 00:00:00 [xfsaild/sda1]
root 656 2 0 Nov08 ? 00:00:00 [kdmflush]
root 657 2 0 Nov08 ? 00:00:00 [bioset]
root 658 2 0 Nov08 ? 00:00:00 [kdmflush]
root 660 2 0 Nov08 ? 00:00:00 [bioset]
root 661 2 0 Nov08 ? 00:00:00 [kdmflush]
root 663 2 0 Nov08 ? 00:00:00 [bioset]
root 665 2 0 Nov08 ? 00:00:00 [kdmflush]
root 668 2 0 Nov08 ? 00:00:00 [bioset]
root 671 2 0 Nov08 ? 00:00:00 [kdmflush]
root 672 2 0 Nov08 ? 00:00:00 [bioset]
root 698 2 0 Nov08 ? 00:00:00 [jbd2/dm-5-8]
root 699 2 0 Nov08 ? 00:00:00 [ext4-rsv-conver]
root 702 2 0 Nov08 ? 00:00:10 [jbd2/dm-6-8]
root 704 2 0 Nov08 ? 00:00:00 [ext4-rsv-conver]
root 714 2 0 Nov08 ? 00:00:00 [jbd2/dm-4-8]
root 715 2 0 Nov08 ? 00:00:00 [ext4-rsv-conver]
root 724 2 0 Nov08 ? 00:00:00 [jbd2/dm-3-8]
root 725 2 0 Nov08 ? 00:00:00 [ext4-rsv-conver]
root 727 2 0 Nov08 ? 00:00:00 [jbd2/dm-2-8]
root 728 2 0 Nov08 ? 00:00:00 [ext4-rsv-conver]
root 734 1 0 Nov08 ? 00:00:05 /sbin/auditd
polkitd 758 1 0 Nov08 ? 00:00:03 /usr/lib/polkit-1/polkitd --no-debug
dbus 759 1 0 Nov08 ? 00:00:21 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
root 765 1 0 Nov08 ? 00:00:00 /usr/bin/VGAuthService -s
root 766 1 0 Nov08 ? 00:05:29 /usr/bin/vmtoolsd
root 768 1 0 Nov08 ? 00:00:00 /usr/sbin/smartd -n -q never
root 769 1 0 Nov08 ? 00:00:21 /usr/sbin/irqbalance --foreground
root 776 1 0 Nov08 ? 00:00:08 /usr/lib/systemd/systemd-logind
root 783 1 0 Nov08 ? 00:00:00 /usr/sbin/gpm -m /dev/input/mice -t exps2
root 786 1 0 Nov08 ? 00:00:21 /usr/sbin/crond -n
root 790 1 0 Nov08 ? 00:00:00 /usr/sbin/atd -f
chrony 806 1 0 Nov08 ? 00:00:01 /usr/sbin/chronyd
root 841 2 0 Nov08 ? 00:00:00 [kworker/1:1H]
root 988 1 0 Nov08 ? 00:00:21 /usr/sbin/httpd -DFOREGROUND
root 991 1 0 Nov08 ? 00:13:58 python /usr/bin/goferd --foreground
root 994 1 0 Nov08 ? 00:00:52 /usr/sbin/rsyslogd -n
root 1005 1 0 Nov08 ? 00:00:00 /usr/sbin/sshd -D
root 1007 1 0 Nov08 ? 00:00:48 /usr/bin/python -Es /usr/sbin/tuned -l -P
root 1008 1 0 Nov08 ? 00:00:00 /usr/bin/rhsmcertd
root 1011 1 0 Nov08 ? 00:00:00 /usr/sbin/xinetd -stayalive -pidfile /var/run/xinetd.pid
mysql 1091 1 0 Nov08 ? 00:00:00 /bin/sh /usr/bin/mysqld_safe --basedir=/usr
mysql 1419 1091 0 Nov08 ? 00:08:09 /usr/libexec/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib64/mysql/plugin --log-error=/var/log/mariadb/mariadb.log --pid-file=/var/run/mariadb/mariadb.pid --socket=/var/lib/mysql/mysql.sock
root 1504 1 0 Nov08 ? 00:00:03 /usr/libexec/postfix/master -w
postfix 1515 1504 0 Nov08 ? 00:00:01 qmgr -l -t unix -u
nagios 1551 1 0 Nov08 ? 00:00:00 /usr/local/ncpa/ncpa_listener --start
nagios 1553 1 0 Nov08 ? 00:01:11 /usr/local/ncpa/ncpa_passive --start
nagios 1557 1 0 Nov08 ? 00:00:30 /usr/local/nagios/bin/npcd -d -f /usr/local/nagios/etc/pnp/npcd.cfg
ajaxterm 1575 1 0 Nov08 ? 00:02:14 python /usr/share/ajaxterm/ajaxterm.py --daemon --port=8022 --uid=ajaxterm
root 1735 1 0 Nov08 tty1 00:00:00 /sbin/agetty --noclear tty1 linux
root 8313 2 0 07:05 ? 00:00:00 [kworker/0:2]
nagios 8672 1 0 Nov08 ? 00:00:00 /usr/local/nagios/bin/ndo2db -c /usr/local/nagios/etc/ndo2db.cfg -f
nagios 8719 1 0 Nov08 ? 00:01:11 /usr/local/nagios/bin/nagios -d /usr/local/nagios/etc/nagios.cfg
nagios 8721 8719 0 Nov08 ? 00:00:01 /usr/local/nagios/bin/nagios --worker /usr/local/nagios/var/rw/nagios.qh
nagios 8722 8719 0 Nov08 ? 00:00:01 /usr/local/nagios/bin/nagios --worker /usr/local/nagios/var/rw/nagios.qh
nagios 8723 8719 0 Nov08 ? 00:00:01 /usr/local/nagios/bin/nagios --worker /usr/local/nagios/var/rw/nagios.qh
nagios 8724 8719 0 Nov08 ? 00:00:01 /usr/local/nagios/bin/nagios --worker /usr/local/nagios/var/rw/nagios.qh
nagios 8728 8672 0 Nov08 ? 00:00:08 /usr/local/nagios/bin/ndo2db -c /usr/local/nagios/etc/ndo2db.cfg -f
nagios 8729 8728 0 Nov08 ? 00:00:51 /usr/local/nagios/bin/ndo2db -c /usr/local/nagios/etc/ndo2db.cfg -f
nagios 8782 8719 0 Nov08 ? 00:00:28 /usr/local/nagios/bin/nagios -d /usr/local/nagios/etc/nagios.cfg
root 12760 2 0 07:50 ? 00:00:00 [kworker/1:0]
root 15820 2 0 08:20 ? 00:00:00 [kworker/u128:0]
root 15948 2 0 08:21 ? 00:00:00 [kworker/1:2]
postfix 16295 1504 0 08:25 ? 00:00:00 pickup -l -t unix -u
root 16297 2 0 08:25 ? 00:00:00 [kworker/0:0]
root 16298 2 0 08:25 ? 00:00:00 [kworker/u128:2]
apache 16869 988 0 08:29 ? 00:00:00 /usr/sbin/httpd -DFOREGROUND
root 16884 1005 0 08:29 ? 00:00:00 sshd: admin [priv]
admin 16888 16884 0 08:29 ? 00:00:00 sshd: admin@pts/0
root 16889 1005 0 08:29 ? 00:00:00 sshd: admin [priv]
admin 16893 16889 0 08:29 ? 00:00:00 sshd: admin@notty
admin 16894 16893 0 08:29 ? 00:00:00 /usr/libexec/openssh/sftp-server
admin 16910 16888 0 08:29 pts/0 00:00:00 -bash
root 16949 16910 0 08:29 pts/0 00:00:00 sudo -s
root 16953 16949 0 08:29 pts/0 00:00:00 /bin/bash
root 17054 2 0 08:30 ? 00:00:00 [kworker/1:1]
root 17238 2 0 08:31 ? 00:00:00 [kworker/u128:1]
root 17243 16953 0 08:31 pts/0 00:00:00 ps -ef --cols=300
apache 18366 988 0 Nov12 ? 00:00:03 /usr/sbin/httpd -DFOREGROUND
apache 19233 988 0 Nov12 ? 00:00:00 /usr/sbin/httpd -DFOREGROUND
apache 46956 988 0 Nov12 ? 00:01:23 /usr/sbin/httpd -DFOREGROUND
apache 46995 988 0 Nov12 ? 00:00:50 /usr/sbin/httpd -DFOREGROUND
apache 49119 988 0 Nov12 ? 00:01:16 /usr/sbin/httpd -DFOREGROUND
apache 56307 988 0 Nov12 ? 00:00:27 /usr/sbin/httpd -DFOREGROUND
apache 56926 988 0 Nov12 ? 00:00:26 /usr/sbin/httpd -DFOREGROUND
apache 57523 988 0 Nov12 ? 00:00:37 /usr/sbin/httpd -DFOREGROUND
apache 61472 988 0 Nov12 ? 00:00:17 /usr/sbin/httpd -DFOREGROUND
For every command I submit through the Nagios XI interface I get the following error :
Capture.PNG
And systat shows :
Capture2.PNG
Regards.
Re: Hosts still showing up after "restore_defaults.sh"
Posted: Wed Nov 14, 2018 9:33 am
by tgriep
One thing I see is that the cron daemon is not running the processes that Nagios needs to run so to start them, login as root and run this command.
Code: Select all
service crond stop
killall -9 crond
service nagios start
To see if they are running, wait a few minutes and run this.
You should see something similar to this.
Code: Select all
nagios 5908 5904 0 08:26 ? 00:00:00 /bin/sh -c /usr/bin/php -q /usr/local/nagiosxi/cron/event_handler.php >> /usr/local/nagiosxi/var/event_handler.log 2>&1
nagios 5911 5906 0 08:26 ? 00:00:00 /bin/sh -c /usr/bin/php -q /usr/local/nagiosxi/cron/cmdsubsys.php >> /usr/local/nagiosxi/var/cmdsubsys.log 2>&1
nagios 5912 5903 0 08:26 ? 00:00:00 /bin/sh -c /usr/bin/php -q /usr/local/nagiosxi/cron/feedproc.php >> /usr/local/nagiosxi/var/feedproc.log 2>&1
nagios 5913 5902 0 08:26 ? 00:00:00 /bin/sh -c /usr/bin/php -q /usr/local/nagiosxi/cron/perfdataproc.php >> /usr/local/nagiosxi/var/perfdataproc.log 2>&1
nagios 5914 5905 0 08:26 ? 00:00:00 /bin/sh -c /usr/bin/php -q /usr/local/nagiosxi/cron/eventman.php >> /usr/local/nagiosxi/var/eventman.log 2>&1
nagios 5916 5907 0 08:26 ? 00:00:00 /bin/sh -c /usr/bin/php -q /usr/local/nagiosxi/cron/sysstat.php >> /usr/local/nagiosxi/var/sysstat.log 2>&1
nagios 5917 5908 0 08:26 ? 00:00:00 /usr/bin/php -q /usr/local/nagiosxi/cron/event_handler.php
nagios 5922 5911 0 08:26 ? 00:00:00 /usr/bin/php -q /usr/local/nagiosxi/cron/cmdsubsys.php
nagios 5923 5912 0 08:26 ? 00:00:00 /usr/bin/php -q /usr/local/nagiosxi/cron/feedproc.php
nagios 5924 5913 0 08:26 ? 00:00:00 /usr/bin/php -q /usr/local/nagiosxi/cron/perfdataproc.php
nagios 5925 5914 0 08:26 ? 00:00:00 /usr/bin/php -q /usr/local/nagiosxi/cron/eventman.php
nagios 5927 5916 0 08:26 ? 00:00:00 /usr/bin/php -q /usr/local/nagiosxi/cron/sysstat.php
nagios 8076 8063 0 Nov09 ? 00:00:00 /bin/sh -c /usr/bin/php -q /usr/local/nagiosxi/cron/cmdsubsys.php >> /usr/local/nagiosxi/var/cmdsubsys.log 2>&1
nagios 8086 8076 0 Nov09 ? 00:00:00 /usr/bin/php -q /usr/local/nagiosxi/cron/cmdsubsys.php
nagios 9131 9128 0 Nov09 ? 00:00:00 /bin/sh -c /usr/bin/php -q /usr/local/nagiosxi/cron/cmdsubsys.php >> /usr/local/nagiosxi/var/cmdsubsys.log 2>&1
If not, then something is not allowing the cron daemon to run. Usually it is a security policy.
Check the cron logs by running the following and posting the output here.
Next is the missing nagios.lock file.
To fix this, we will need to know which version of XI that is installed and the following 2 files from the server uploaded to the post.
Code: Select all
/etc/init.d/nagios
/usr/local/nagios/etc/nagios.cfg
Thanks.