Page 1 of 1

NCPA disk checks output

Posted: Wed Aug 18, 2021 3:42 pm
by dlukinski
Hello Nagios support

Please help to understand why Nagios xI output is different from NCPA API output:

Say, ./check_ncpa.py -H fikc-alfind02.konecranes.com -t '<your token>' -M 'disk/logical/|solr|suggestions' -w 80 -c 90

1. This is what API promises to show: CRITICAL: Used disk space was 100.00 % (Used: 376.47 GiB, Free: 0.00 GiB, Total: 393.48 GiB) | 'used'=376.47GiB;315;354; 'free'=0.00GiB;315;354; 'total'=393.48GiB;315;354;


2. That is what XI shows: CRITICAL: Used_percent was 100 % (this is it)

- Where are Total /Free?

Re: NCPA disk checks output

Posted: Thu Aug 19, 2021 2:55 pm
by gsmith
Hi

From the command line I get:

Code: Select all

[root@gs-cent8-23-82 greg]# /usr/local/nagios/libexec/check_ncpa.py -H 192.168.23.82 -t 'gjstoken' -P 5693 -M 'disk/logical/|greg' -w '70' -c '90'
CRITICAL: Used disk space was 100.00 % (Used: 0.46 GiB, Free: 0.00 GiB, Total: 0.46 GiB) | 'used'=0.46GiB;;; 'free'=0.00GiB;;; 'total'=0.46GiB;;;
[root@gs-cent8-23-82 greg]#
And here it is displayed ih the gui:
Image8.jpg
I even changed my mountpoint and got the same results:

Code: Select all

[root@gs-cent8-23-82 mysubdir]# mount -l
    ~ ~ ~ ~ ~
/dev/sdb on /greg/mysubdir type ext4 (rw,relatime)
Image9.jpg
So please provide the output of the following (using sudo if required):

Code: Select all

cat /etc/os-release
uname -a
mount -l
cat /usr/local/nagiosxi/var/xiversion|grep full
Also send me a System Profile:

To send us your system profile.
1. Login to the Nagios XI GUI using a web browser.
2. Click the "Admin" > "System Profile" Menu
3. Click the "Download Profile" button
4. Save the profile.zip file and share this in a private message and then reply to this post to bring it up in the queue.


Thanks

Re: NCPA disk checks output

Posted: Wed Sep 15, 2021 2:23 pm
by dlukinski
gsmith wrote:Hi

From the command line I get:

Code: Select all

[root@gs-cent8-23-82 greg]# /usr/local/nagios/libexec/check_ncpa.py -H 192.168.23.82 -t 'gjstoken' -P 5693 -M 'disk/logical/|greg' -w '70' -c '90'
CRITICAL: Used disk space was 100.00 % (Used: 0.46 GiB, Free: 0.00 GiB, Total: 0.46 GiB) | 'used'=0.46GiB;;; 'free'=0.00GiB;;; 'total'=0.46GiB;;;
[root@gs-cent8-23-82 greg]#
And here it is displayed ih the gui:
Image8.jpg
I even changed my mountpoint and got the same results:

Code: Select all

[root@gs-cent8-23-82 mysubdir]# mount -l
    ~ ~ ~ ~ ~
/dev/sdb on /greg/mysubdir type ext4 (rw,relatime)
Image9.jpg
So please provide the output of the following (using sudo if required):

Code: Select all

cat /etc/os-release
uname -a
mount -l
cat /usr/local/nagiosxi/var/xiversion|grep full
Also send me a System Profile:

To send us your system profile.
1. Login to the Nagios XI GUI using a web browser.
2. Click the "Admin" > "System Profile" Menu
3. Click the "Download Profile" button
4. Save the profile.zip file and share this in a private message and then reply to this post to bring it up in the queue.


Thanks
Hello

Profile is attached and the output is down below (please note that this is Nagios VMware template server)

Code: Select all

[root@fikc-nagxiprod01 ~]# cat /etc/os-release
NAME="CentOS Linux"
VERSION="7 (Core)"
ID="centos"
ID_LIKE="rhel fedora"
VERSION_ID="7"
PRETTY_NAME="CentOS Linux 7 (Core)"
ANSI_COLOR="0;31"
CPE_NAME="cpe:/o:centos:centos:7"
HOME_URL="https://www.centos.org/"
BUG_REPORT_URL="https://bugs.centos.org/"

CENTOS_MANTISBT_PROJECT="CentOS-7"
CENTOS_MANTISBT_PROJECT_VERSION="7"
REDHAT_SUPPORT_PRODUCT="centos"
REDHAT_SUPPORT_PRODUCT_VERSION="7"

[root@fikc-nagxiprod01 ~]# uname -a
Linux fikc-nagxiprod01 3.10.0-1160.36.2.el7.x86_64 #1 SMP Wed Jul 21 11:57:15 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
[root@fikc-nagxiprod01 ~]# mount -l
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
devtmpfs on /dev type devtmpfs (rw,nosuid,size=12245216k,nr_inodes=3061304,mode=755)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/usr/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_prio,net_cls)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpuacct,cpu)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
configfs on /sys/kernel/config type configfs (rw,relatime)
/dev/mapper/centos-root on / type ext4 (rw,relatime,data=ordered)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=34,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=12714)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
/dev/sda1 on /boot type ext4 (rw,relatime,data=ordered)
sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw,relatime)
tmpfs on /var/nagiosramdisk type tmpfs (rw,relatime,size=524288k)
fikc-isilon01.res.kcg.global:/ifs/data/fikc-nagxiprod01-backup on /mnt/nfs/backup type nfs (rw,relatime,vers=3,rsize=131072,wsize=524288,namlen=255,hard,proto=tcp,timeo=600,retrans=2,sec=sys,mountaddr=10.102.74.34,mountvers=3,mountport=300,mountproto=udp,local_lock=none,addr=10.102.74.34)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=2451384k,mode=700,uid=1000,gid=1000)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
tmpfs on /run/user/0 type tmpfs (rw,nosuid,nodev,relatime,size=2451384k,mode=700)
[root@fikc-nagxiprod01 ~]# cat /usr/local/nagiosxi/var/xiversion|grep full
full=5.8.5
[root@fikc-nagxiprod01 ~]#


Re: NCPA disk checks output

Posted: Thu Sep 16, 2021 11:58 am
by gsmith
Hi,

Thanks! I'll get this loaded after our afternoon staff meeting and will see if I get the same
results as you.

Thanks

Re: NCPA disk checks output

Posted: Fri Sep 24, 2021 9:08 am
by dlukinski
gsmith wrote:Hi,

Thanks! I'll get this loaded after our afternoon staff meeting and will see if I get the same
results as you.

Thanks

Please update?

Re: NCPA disk checks output

Posted: Mon Sep 27, 2021 9:34 am
by gsmith
Hi,

My apologies. I was out sick all last week and will work on this today.

Thank you.

Re: NCPA disk checks output

Posted: Mon Sep 27, 2021 12:05 pm
by gsmith
Hi

When I look at your service definition for "resource - PROD /solr/suggestions volume used 90w / 95c" I see:

Code: Select all

$USER1$/check_ncpa.py -H $HOSTADDRESS$ $ARG1$

-t 'alfresco' -P 5693 -M 'disk/logical/|solr|suggestions/used_percent' -w 90 -c 95 -u G

Please change it to:

Code: Select all

$USER1$/check_ncpa.py -H $HOSTADDRESS$ $ARG1$

-t 'alfresco' -P 5693 -M 'disk/logical/|solr|suggestions' -w 90 -c 95 -u G

Thanks

Re: NCPA disk checks output

Posted: Thu Sep 30, 2021 9:51 am
by dlukinski
gsmith wrote:Hi

When I look at your service definition for "resource - PROD /solr/suggestions volume used 90w / 95c" I see:

Code: Select all

$USER1$/check_ncpa.py -H $HOSTADDRESS$ $ARG1$

-t 'alfresco' -P 5693 -M 'disk/logical/|solr|suggestions/used_percent' -w 90 -c 95 -u G

Please change it to:

Code: Select all

$USER1$/check_ncpa.py -H $HOSTADDRESS$ $ARG1$

-t 'alfresco' -P 5693 -M 'disk/logical/|solr|suggestions' -w 90 -c 95 -u G

Thanks
This worked, thank you!
- OK to close