Nagios Support Forum

Hi Team,

In our event log we found that

External command [1632808419] PROCESS_SERVICE_CHECK_RESULT;x.x.x.x;SNMP Traps;0;An authenticationFailure trap signifies that the SNMP 100.81.43.21 1 100.81.43.21 / enterprises.9.2.1.5.0 ():100.81.43.21 enterprises.9.9.412.1.1.1.0 ():1 enterprises.9.9.412.1.1.2.0 ():100.81.43.21 returned error Command failed


Error: External command failed -> PROCESS_SERVICE_CHECK_RESULT;x.x.x.x;SNMP Traps;0;An authenticationFailure trap signifies that the SNMP 100.81.43.21 1 100.81.43.21 / enterprises.9.2.1.5.0 ():100.81.43.21 enterprises.9.9.412.1.1.1.0 ():1 enterprises.9.9.412.1.1.2.0 ():100.81.43.21

Warning: Passive check result was received for service 'SNMP Traps' on host 'x.x.x.x', but the host could not be found!

That host is not configured in nagios.
How can we stop these checks?

Thanks!

Hello @lanxessinfy

That appears to be Auto populating from 'Unconfigured Objects'.

You can disable that from the Nagios XI Web console > Admin > Unconfigured Objects:

• [ ] Enable Auto Import: Automatically import host/services into the CCM with templates applied below.

Please let us know if you need anything further,
Perry

Hi,

I don't want to configure that host and how to stop those alerts

Thanks

Hello @lanxessinfy

In my original reply; I made mention 'Unconfigured Objects' and want to check to see if the following is enabled?

Nagios XI Web console > Admin > Unconfigured Objects:

[ ] Enable Auto Import: Automatically import host/services into the CCM with templates applied below.

If this option is enabled, the 'Unconfigured Objects will be automatically imported.

Please let me know what you find,
Perry

Hi,

PFA

Thanks

The host '10.249.119.4' will sit in the 'Unconfigured Objects List' until it is cleared and will not affect any future alerts.

Thanks, I will go ahead and lock.
Perry