NCPA listener dies on SunOS 5.11 (SPARC)
Posted: Thu Oct 19, 2023 2:39 pm
I have a pair of Sun/Oracle SPARC 7 boxes running SunOS 5.11
I've installed NCPA as per instructions. NCPA_listener and NCPA_passive both start and run... for a little while... then the listener dies.
The email generated says little:
Date: Wed, 18 Oct 2023 21:14:25 -0400 (EDT)
From: No Access User <noaccess@mtlodbvlcprd01b>
Message-Id: <202310190114.39J1EPj9023502@mtlodbvlcprd01b>
Subject: Fault Management Event: mtlodbvlcprd01b:SMF-8000-YX
To: root
Content-Length: 854
SUNW-MSG-ID: SMF-8000-YX, TYPE: Defect, VER: 1, SEVERITY: Major
EVENT-TIME: Wed Oct 18 21:14:25 EDT 2023
PLATFORM: unknown, CSN: unknown, HOSTNAME: mtlodbvlcprd01b
SOURCE: software-diagnosis, REV: 0.2
EVENT-ID: d52eca4f-4d96-4b63-a75e-a2e3bce327bb
DESC: Service svc:/site/ncpa_listener:default failed - a method is failing in a retryable manner but too often.
AUTO-RESPONSE: The service has been placed into the maintenance state.
IMPACT: svc:/site/ncpa_listener:default is unavailable.
REC-ACTION: Run 'svcs -xv svc:/site/ncpa_listener:default' to determine the generic reason why the service failed, the location of any logfiles, and a list of other services impacted. Please refer to the associated
reference document at http://support.oracle.com/msg/SMF-8000-YX for the latest service procedures and pol icies regarding this diagnosis.
FRU-LOCATION:
The reference document is pretty useless and the log only shows using the service admin tool to "clear" the maintenance mode, which restarts the listener again for a while, but eventually it dies again.
Any suggestion would be helpful.
Thanks!
I've installed NCPA as per instructions. NCPA_listener and NCPA_passive both start and run... for a little while... then the listener dies.
The email generated says little:
Date: Wed, 18 Oct 2023 21:14:25 -0400 (EDT)
From: No Access User <noaccess@mtlodbvlcprd01b>
Message-Id: <202310190114.39J1EPj9023502@mtlodbvlcprd01b>
Subject: Fault Management Event: mtlodbvlcprd01b:SMF-8000-YX
To: root
Content-Length: 854
SUNW-MSG-ID: SMF-8000-YX, TYPE: Defect, VER: 1, SEVERITY: Major
EVENT-TIME: Wed Oct 18 21:14:25 EDT 2023
PLATFORM: unknown, CSN: unknown, HOSTNAME: mtlodbvlcprd01b
SOURCE: software-diagnosis, REV: 0.2
EVENT-ID: d52eca4f-4d96-4b63-a75e-a2e3bce327bb
DESC: Service svc:/site/ncpa_listener:default failed - a method is failing in a retryable manner but too often.
AUTO-RESPONSE: The service has been placed into the maintenance state.
IMPACT: svc:/site/ncpa_listener:default is unavailable.
REC-ACTION: Run 'svcs -xv svc:/site/ncpa_listener:default' to determine the generic reason why the service failed, the location of any logfiles, and a list of other services impacted. Please refer to the associated
reference document at http://support.oracle.com/msg/SMF-8000-YX for the latest service procedures and pol icies regarding this diagnosis.
FRU-LOCATION:
The reference document is pretty useless and the log only shows using the service admin tool to "clear" the maintenance mode, which restarts the listener again for a while, but eventually it dies again.
Any suggestion would be helpful.
Thanks!