Dear Expert
On the Nagvis graph (which showing live Status of the link via drawing the Service Line/Service Icon/Host Icon) its very okay, now on the same map, how we can add below
(a.) Performance Graph (Bandwidth Utilization) Temperature Graph
(b.) Status Information (Output of the Service) Humidity Value
Just assume that we monitoring our datacenter with router/switches, however want to add one (a.) Temperature graph and just one (b.) Humidity Value.
Please note Hover-it giving the value when we take our mouse on that Icon/Image but we want to monitor on big screen without any human intervention.
You most welcome to provide some link reference , document , however your some guideline in this post much appreciated too.
Version using = Nagvis 1.7 ,, XI2014 2.0
if not possible via GUI, please let me know what to add in mymap.cfg
Regards
Bandwidth Graph and Status Information on Nagvis Graph
-
jdalrymple
- Skynet Drone
- Posts: 2620
- Joined: Wed Feb 11, 2015 1:56 pm
Re: Bandwidth Graph and Status Information on Nagvis Graph
Pretty far outside the scope of our expertise, but we'll of course try 
So have you experimented with any of the NagVis gadgets? I'm certain that will be the tool you'll need to achieve both of the desired goals. I would suggest looking over them and seeing if you can find any that suit your needs and see if you can get them to work. If you run into any issues please reach back out to us.
The one thing I will caution heavily against is making any changes outside of the NagVis environment. Make sure to backup your system too. You're traversing territories unknown to Nagios personnel.
So have you experimented with any of the NagVis gadgets? I'm certain that will be the tool you'll need to achieve both of the desired goals. I would suggest looking over them and seeing if you can find any that suit your needs and see if you can get them to work. If you run into any issues please reach back out to us.
The one thing I will caution heavily against is making any changes outside of the NagVis environment. Make sure to backup your system too. You're traversing territories unknown to Nagios personnel.
Re: Bandwidth Graph and Status Information on Nagvis Graph
Dear jdalrymple
I never used Gadgets but today I have done it.
While using Service="........Bandwidth" $aPerfdata giving current values but how to fetch Maximum In/Out values in 24 hours period and what time it was on peak.
Regards
I never used Gadgets but today I have done it.
While using Service="........Bandwidth" $aPerfdata giving current values but how to fetch Maximum In/Out values in 24 hours period and what time it was on peak.
Regards
You do not have the required permissions to view the files attached to this post.
Zajil NMS
Re: Bandwidth Graph and Status Information on Nagvis Graph
It looks like your other thread addresses that last question: https://support.nagios.com/forum/viewto ... 01#p155901
Please try to keep issues separate and in their own threads, otherwise we end up spending twice as much time replying to the same issue.
Please try to keep issues separate and in their own threads, otherwise we end up spending twice as much time replying to the same issue.
Former Nagios employee
Re: Bandwidth Graph and Status Information on Nagvis Graph
Dear tmcdonald
Okay , please close this post.
Regards
Okay , please close this post.
Regards
Zajil NMS