Code: Select all
Unable to authenticate: Could not connect to the LDAP server selected.ldap integration problem
Re: ldap integration problem
the error is:
I dont know the answer to the ldap software question
Proudly running:
NagiosXI 5.4.12 2 node Prod Env 2500 hosts, 13,000 services
Nagiosxi 5.5.7(test env) 2500 hosts, 13,000 services
Nagios Logserver 2 node Prod Env 500 objects sending
Nagios Network Analyser
Nagios Fusion
NagiosXI 5.4.12 2 node Prod Env 2500 hosts, 13,000 services
Nagiosxi 5.5.7(test env) 2500 hosts, 13,000 services
Nagios Logserver 2 node Prod Env 500 objects sending
Nagios Network Analyser
Nagios Fusion
Re: ldap integration problem
Did you try changing the encryption to TLS?
What about if you disable encryption and try to go over port 389, does it work then?
Might also want to try TLS over port 389 since that's also possible.
What about if you disable encryption and try to go over port 389, does it work then?
Might also want to try TLS over port 389 since that's also possible.
Re: ldap integration problem
ill give it a whirl and report back. And thanks for the help man.
Proudly running:
NagiosXI 5.4.12 2 node Prod Env 2500 hosts, 13,000 services
Nagiosxi 5.5.7(test env) 2500 hosts, 13,000 services
Nagios Logserver 2 node Prod Env 500 objects sending
Nagios Network Analyser
Nagios Fusion
NagiosXI 5.4.12 2 node Prod Env 2500 hosts, 13,000 services
Nagiosxi 5.5.7(test env) 2500 hosts, 13,000 services
Nagios Logserver 2 node Prod Env 500 objects sending
Nagios Network Analyser
Nagios Fusion
Re: ldap integration problem
ok exremely, extremely really extremely stupid question. In the pdf it says:"
sigh can believe im asking this.
does that mean to wipe out the info between those lines?
Code: Select all
Editing the Certificate
Open the file in a text editor and leave just lines between the first section delimited
by the "BEGIN CERTIFICATE" and "END CERTIFICATE" lines.does that mean to wipe out the info between those lines?
Proudly running:
NagiosXI 5.4.12 2 node Prod Env 2500 hosts, 13,000 services
Nagiosxi 5.5.7(test env) 2500 hosts, 13,000 services
Nagios Logserver 2 node Prod Env 500 objects sending
Nagios Network Analyser
Nagios Fusion
NagiosXI 5.4.12 2 node Prod Env 2500 hosts, 13,000 services
Nagiosxi 5.5.7(test env) 2500 hosts, 13,000 services
Nagios Logserver 2 node Prod Env 500 objects sending
Nagios Network Analyser
Nagios Fusion
Re: ldap integration problem
There are no stupid questions, don't worry, we're here to educate too.
You would wipe out everything before and after those lines, you basically just want this left in the file:
You would wipe out everything before and after those lines, you basically just want this left in the file:
Code: Select all
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----Re: ldap integration problem
well I did everything you suggested and it still gives me that connection error.
Proudly running:
NagiosXI 5.4.12 2 node Prod Env 2500 hosts, 13,000 services
Nagiosxi 5.5.7(test env) 2500 hosts, 13,000 services
Nagios Logserver 2 node Prod Env 500 objects sending
Nagios Network Analyser
Nagios Fusion
NagiosXI 5.4.12 2 node Prod Env 2500 hosts, 13,000 services
Nagiosxi 5.5.7(test env) 2500 hosts, 13,000 services
Nagios Logserver 2 node Prod Env 500 objects sending
Nagios Network Analyser
Nagios Fusion
Re: ldap integration problem
Let's move this into a ticket, please send in an email to [email protected] with a descriptive subject and detailed body with a link back to this thread so that we can get a remote session setup.
Thank you
Thank you
Re: ldap integration problem
thanks man! Ill be out tommorow but we can do it monday
Proudly running:
NagiosXI 5.4.12 2 node Prod Env 2500 hosts, 13,000 services
Nagiosxi 5.5.7(test env) 2500 hosts, 13,000 services
Nagios Logserver 2 node Prod Env 500 objects sending
Nagios Network Analyser
Nagios Fusion
NagiosXI 5.4.12 2 node Prod Env 2500 hosts, 13,000 services
Nagiosxi 5.5.7(test env) 2500 hosts, 13,000 services
Nagios Logserver 2 node Prod Env 500 objects sending
Nagios Network Analyser
Nagios Fusion
Re: ldap integration problem
Sounds good, once you send it in I will send you my calendar link so you can schedule it.