snmp walk works but snmp get doesnt

[benhank]

Ok so I have run the snmp walk wizard:

Capture.PNG

And it worked just fine.
however...

Code: Select all

[root@lkennagiost01 ~]# /usr/local/nagios/libexec/check_snmp -H 172.22.191.190 -C I$ilonpublic -P 2c -o enterprises.12124.2.52.1.5.1
SNMP problem - No data received from host

[update]
I have verified that the receiving server is correct configured to receive snmp queries, my network guys have assured me that there are no issues with our firewalls, I have iptables disabled on my test box, which is polling other devices via snmp.
I just dont get why xi can do a snmpwalk and get the data I need, but the checks that I create with the wizards fail, and running the check from the command line fails.

[tgriep]

Try increasing the timeout for the check_snmp plugin by adding -t 59 to the command and see if that works.

[tgriep]

Another thing to try is to put single quotes around the community string as it has a $ in it.

Code: Select all

 /usr/local/nagios/libexec/check_snmp -H 172.22.191.190 -C 'I$ilonpublic' -P 2c -o enterprises.12124.2.52.1.5.1

The wizard is escaping and that is why it is working there.

[benhank]

200w.gif

Another thing to try is to put single quotes around the community string as it has a $ in it.

Code: Select all
/usr/local/nagios/libexec/check_snmp -H 172.22.191.190 -C 'I$ilonpublic' -P 2c -o enterprises.12124.2.52.1.5.1

Capture.PNG

200.gif

THANKS MAN!

[benhank]

you can lock it up WHO00ooooOOOOOO!