Hi Guys,
I tried upgrading XI to 5.6.3 from web interface but it didn't work. It just keep saying update will take few minutes and no logs were populated on the progress box. it just stays there for more then 5 hours and then i closed it.
local backup directory /store/backups/nagiosxi/ 's modification date changed but no backups populated in directory.
can you confirm what might have gone wrong here
I started upgrade on chrome new browser.
NagiosXI upgrade 5.5.11 to 5.6.3 didn't work form web
-
- Posts: 182
- Joined: Thu May 14, 2015 9:57 pm
-
- Posts: 5324
- Joined: Wed Aug 22, 2018 4:39 pm
- Location: saint paul
Re: NagiosXI upgrade 5.5.11 to 5.6.3 didn't work form web
Hello,
On occasion, the web upgrade can stall, please try performing a manual upgrade:
See: Nagios XI Upgrade Instructions
If you need to clear the upgrade in progress message, please follow these instructions:
Nagios XI - Reset Upgrade Status In Web Interface
Let me know if you're able to successfully upgrade to 5.6.3.
On occasion, the web upgrade can stall, please try performing a manual upgrade:
Code: Select all
wget -O upgrade.sh https://assets.nagios.com/downloads/nagiosxi/upgrade.sh
sh ./upgrade.sh
If you need to clear the upgrade in progress message, please follow these instructions:
Nagios XI - Reset Upgrade Status In Web Interface
Let me know if you're able to successfully upgrade to 5.6.3.
As of May 25th, 2018, all communications with Nagios Enterprises and its employees are covered under our new Privacy Policy.
Be sure to check out our Knowledgebase for helpful articles and solutions!
Be sure to check out our Knowledgebase for helpful articles and solutions!
-
- Posts: 182
- Joined: Thu May 14, 2015 9:57 pm
Re: NagiosXI upgrade 5.5.11 to 5.6.3 didn't work form web
Hi Ben,
after resetting the upgrade status i tried upgrade from web interface and it failed again.
i have not yet tried the manual method
after resetting the upgrade status i tried upgrade from web interface and it failed again.
i have not yet tried the manual method
-
- DevOps Engineer
- Posts: 19396
- Joined: Tue Nov 15, 2011 3:11 pm
- Location: Nagios Enterprises
- Contact:
Re: NagiosXI upgrade 5.5.11 to 5.6.3 didn't work form web
I would try the manual method. There are certain systems with various security settings that simply prevent the GUI method from working.
-
- Posts: 182
- Joined: Thu May 14, 2015 9:57 pm
Re: NagiosXI upgrade 5.5.11 to 5.6.3 didn't work form web
Hi Guys,
I have upgraded to version 5.6.3 manually. It looks fine but the search box is not working as it was working before.
on web interface, at left side in 'Quick view' if I go to 'All Service Problems or All Host Problems' i am unable to search any host or service respectively where as search is working in Detail tab's Host Status and Service Status tab.
I have tried on multiple browsers
can anyone advice, as it was working for me before.
I have upgraded to version 5.6.3 manually. It looks fine but the search box is not working as it was working before.
on web interface, at left side in 'Quick view' if I go to 'All Service Problems or All Host Problems' i am unable to search any host or service respectively where as search is working in Detail tab's Host Status and Service Status tab.
I have tried on multiple browsers
can anyone advice, as it was working for me before.
Re: NagiosXI upgrade 5.5.11 to 5.6.3 didn't work form web
Can you tail the mysqld.log (or mariadb.log, if you are using mariadb) for errors/corrupt tables?
Also, show us an example of the error that you are getting in the GUI. We haven't been able to recreate the issue in-house. The search on these two pages works just fine.
Example:
Code: Select all
tail /var/log/mysqld.log
tail /var/log/mariadb/mariadb.log
Example:
You do not have the required permissions to view the files attached to this post.
Be sure to check out our Knowledgebase for helpful articles and solutions!
-
- Posts: 182
- Joined: Thu May 14, 2015 9:57 pm
Re: NagiosXI upgrade 5.5.11 to 5.6.3 didn't work form web
Thanks for that
I think i figured it, probably it is happening due to the filter on it. please confirm if that is the case. (search will work within the hosts or services which are either down or in critical/warning state) to search a host or service independent of state filter needs to be removed?
There are no table locking error in mysql log
I think i figured it, probably it is happening due to the filter on it. please confirm if that is the case. (search will work within the hosts or services which are either down or in critical/warning state) to search a host or service independent of state filter needs to be removed?
There are no table locking error in mysql log
You do not have the required permissions to view the files attached to this post.
Re: NagiosXI upgrade 5.5.11 to 5.6.3 didn't work form web
Yes, the filters are the problem, even though... this is not a problem as it's by design.
You are looking for "Host Problems" (Filters: Host=Down,Unreachable). The "localhost" host is NOT in Down or Unreachable state, so nagios can't find it... Do you see any results when you search for hosts that are actually down?
You are looking for "Host Problems" (Filters: Host=Down,Unreachable). The "localhost" host is NOT in Down or Unreachable state, so nagios can't find it... Do you see any results when you search for hosts that are actually down?
Be sure to check out our Knowledgebase for helpful articles and solutions!