Getting Login Terminal to the Nagios Server

This support forum board is for support questions relating to Nagios XI, our flagship commercial network monitoring solution.
anilgupta
Posts: 102
Joined: Fri Mar 01, 2019 8:35 am

Getting Login Terminal to the Nagios Server

Post by anilgupta »

Team,

I have THREE instances of Nagios XI running for Dev, Pre-Prod and Prod.

I could see below configuration in /etc/httpd/conf.d/ssl.conf

Code: Select all

<Location /nagiosxi/terminal>
    ProxyPass  https://localhost:7878/
    Order      allow,deny
    Allow      from all
</Location>
When I try to access the resource on HTTP/HTTPS "https://intra.dev.eiamreporting.cac.gov ... minal/",it open SSH Connect. I have attached the screenshot for your reference. I can experience the same behavior across the environments.

Note that the servers are behind Firewall and SSH connection is allowed for limited users, however this setting is violating the security.

Please suggest the way to avoid the unexpected incident.
You do not have the required permissions to view the files attached to this post.
User avatar
lmiltchev
Bugs find me
Posts: 13589
Joined: Mon May 23, 2011 12:15 pm

Re: Getting Login Terminal to the Nagios Server

Post by lmiltchev »

You can disable the SSH Terminal by going to:
Admin > System Config > System Settings > Security > Disable the SSH Terminal web portal = checked > Update Settings
Be sure to check out our Knowledgebase for helpful articles and solutions!
anilgupta
Posts: 102
Joined: Fri Mar 01, 2019 8:35 am

Re: Getting Login Terminal to the Nagios Server

Post by anilgupta »

Hello,

Thanks for your response.

I followed the navigation path mentioned by you to disable the terminal access. I could not it get.

Are you referring to disable checkbox under section "Page Security Settings" ? This seems to be disable Frame Restrictions. Please confirm.
User avatar
lmiltchev
Bugs find me
Posts: 13589
Joined: Mon May 23, 2011 12:15 pm

Re: Getting Login Terminal to the Nagios Server

Post by lmiltchev »

No, it's under the "Security" tab - see below:
example01.PNG
What is the version of Nagios XI that you are currently using? I believe the option to enable/disable the SSH Terminal was added in XI 5.6.0.
Added the ability to enable/disable the web GUI terminal [TPS#13690] -CN
https://www.nagios.com/downloads/nagios-xi/change-log/
You do not have the required permissions to view the files attached to this post.
Be sure to check out our Knowledgebase for helpful articles and solutions!
anilgupta
Posts: 102
Joined: Fri Mar 01, 2019 8:35 am

Re: Getting Login Terminal to the Nagios Server

Post by anilgupta »

I am following the same navigation path.

I am on Nagios XI 5.5.11.

Does it mean I will have to upgrade it.
You do not have the required permissions to view the files attached to this post.
User avatar
lmiltchev
Bugs find me
Posts: 13589
Joined: Mon May 23, 2011 12:15 pm

Re: Getting Login Terminal to the Nagios Server

Post by lmiltchev »

Yes, if you would like to use this option, you would need to upgrade your Nagios XI instance. This option was not available in Nagios XI 5.5.11.
Be sure to check out our Knowledgebase for helpful articles and solutions!
anilgupta
Posts: 102
Joined: Fri Mar 01, 2019 8:35 am

Re: Getting Login Terminal to the Nagios Server

Post by anilgupta »

Got it.
Can you share upgrade instruction / document?
anilgupta
Posts: 102
Joined: Fri Mar 01, 2019 8:35 am

Re: Getting Login Terminal to the Nagios Server

Post by anilgupta »

as per https://www.nagios.com/news/2019/02/nag ... xi-5-5-11/, I went to admin and clicked on update.
However, I am getting "Update Check Problem: Last update check failed".
Please help.
You do not have the required permissions to view the files attached to this post.
User avatar
lmiltchev
Bugs find me
Posts: 13589
Joined: Mon May 23, 2011 12:15 pm

Re: Getting Login Terminal to the Nagios Server

Post by lmiltchev »

Sure, here's our official document on upgrading Nagios XI:

https://assets.nagios.com/downloads/nag ... ctions.pdf
Be sure to check out our Knowledgebase for helpful articles and solutions!
anilgupta
Posts: 102
Joined: Fri Mar 01, 2019 8:35 am

Re: Getting Login Terminal to the Nagios Server

Post by anilgupta »

I am these modules installed in the servers.

Code: Select all

[root@pstvmpkimon02 nagiosupgrade]# python -c "import cryptography"
[root@pstvmpkimon02 nagiosupgrade]# echo $?
0
[root@pstvmpkimon02 nagiosupgrade]# python -c "import pyasn1"
[root@pstvmpkimon02 nagiosupgrade]# echo $?
0
[root@pstvmpkimon02 nagiosupgrade]# python -c "import jinja2"
[root@pstvmpkimon02 nagiosupgrade]# echo $?
0
However I am getting below message while upgrade.

Code: Select all

[root@pstvmpkimon02 nagiosupgrade]# cd nagiosxi/
[root@pstvmpkimon02 nagiosxi]# ./upgrade
Nagios XI Upgrade Log
==========================
DATE: Mon Jun 24 11:32:30 EDT 2019

DISTRO INFO:
RedHatEnterpriseServer
7.5
x86_64


Archive:  sourceguardian/ixed4.lin.x86-64.zip
  inflating: /usr/lib64/php/modules/ixed.5.4.lin
Sourceguardian extension found for PHP version 5.4
Sourceguardian extension already in php.ini
Checking required prereqs...
Please wait...

OLD VERSION: 5508
Loaded plugins: langpacks, product-id, search-disabled-repos, subscription-
              : manager
This system is registered with an entitlement server, but is not receiving updates. You can use subscription-manager to assign subscriptions.

*** WARNING ***
The subscription for following product(s) has expired:
  - MRG Realtime
  - Oracle Java (for RHEL Server)
  - Oracle Java (for RHEL Server) - Extended Update Support
  - RHEL for SAP (for IBM Power LE) - Update Services for SAP Solutions
  - RHEL for SAP - Extended Update Support
  - RHEL for SAP - Update Services for SAP Solutions
  - RHEL for SAP HANA - Extended Update Support
  - RHEL for SAP HANA - Update Services for SAP Solutions
  - Red Hat Ansible Engine
  - Red Hat Beta
  - Red Hat Container Development Kit
  - Red Hat Container Images
  - Red Hat Container Images Beta
  - Red Hat Developer Tools (for RHEL Server)
  - Red Hat Developer Tools Beta (for RHEL Server)
  - Red Hat Developer Toolset (for RHEL Server)
  - Red Hat EUCJP Support (for RHEL Server) - Extended Update Support
  - Red Hat Enterprise Linux Atomic Host
  - Red Hat Enterprise Linux Atomic Host Beta
  - Red Hat Enterprise Linux High Availability (for RHEL Server)
  - Red Hat Enterprise Linux High Availability (for RHEL Server) - Extended Update Support
  - Red Hat Enterprise Linux High Availability - Update Services for SAP Solutions
  - Red Hat Enterprise Linux High Performance Networking (for RHEL Compute Node)
  - Red Hat Enterprise Linux High Performance Networking (for RHEL Server)
  - Red Hat Enterprise Linux High Performance Networking (for RHEL Server) - Extended Update Support
  - Red Hat Enterprise Linux Load Balancer (for RHEL Server)
  - Red Hat Enterprise Linux Load Balancer (for RHEL Server) - Extended Update Support
  - Red Hat Enterprise Linux Resilient Storage (for RHEL Server)
  - Red Hat Enterprise Linux Resilient Storage (for RHEL Server) - Extended Update Support
  - Red Hat Enterprise Linux Scalable File System (for RHEL Server)
  - Red Hat Enterprise Linux Scalable File System (for RHEL Server) - Extended Update Support
  - Red Hat Enterprise Linux Server
  - Red Hat Enterprise Linux Server - Extended Update Support
  - Red Hat Enterprise Linux Server - Update Services for SAP Solutions
  - Red Hat Enterprise Linux for ARM 64
  - Red Hat Enterprise Linux for ARM 64 Beta
  - Red Hat Enterprise Linux for Real Time
  - Red Hat Enterprise Linux for SAP
  - Red Hat Enterprise Linux for SAP Hana
  - Red Hat S-JIS Support (for RHEL Server) - Extended Update Support
  - Red Hat Software Collections (for RHEL Server)
  - Red Hat Software Collections Beta (for RHEL Server)
  - dotNET on RHEL (for RHEL Server)
  - dotNET on RHEL Beta (for RHEL Server)
You no longer have access to the repositories that provide these products.  It is important that you apply an active subscription in order to resume access to security and other critical updates. If you don't have other active subscriptions, you can renew the expired subscription.
Repository nagios-base is listed more than once in the configuration
Repository nagiosxi-deps is listed more than once in the configuration
No packages marked for update
Loaded plugins: langpacks, product-id, search-disabled-repos, subscription-
              : manager
This system is registered with an entitlement server, but is not receiving updates. You can use subscription-manager to assign subscriptions.

*** WARNING ***
The subscription for following product(s) has expired:
  - MRG Realtime
  - Oracle Java (for RHEL Server)
  - Oracle Java (for RHEL Server) - Extended Update Support
  - RHEL for SAP (for IBM Power LE) - Update Services for SAP Solutions
  - RHEL for SAP - Extended Update Support
  - RHEL for SAP - Update Services for SAP Solutions
  - RHEL for SAP HANA - Extended Update Support
  - RHEL for SAP HANA - Update Services for SAP Solutions
  - Red Hat Ansible Engine
  - Red Hat Beta
  - Red Hat Container Development Kit
  - Red Hat Container Images
  - Red Hat Container Images Beta
  - Red Hat Developer Tools (for RHEL Server)
  - Red Hat Developer Tools Beta (for RHEL Server)
  - Red Hat Developer Toolset (for RHEL Server)
  - Red Hat EUCJP Support (for RHEL Server) - Extended Update Support
  - Red Hat Enterprise Linux Atomic Host
  - Red Hat Enterprise Linux Atomic Host Beta
  - Red Hat Enterprise Linux High Availability (for RHEL Server)
  - Red Hat Enterprise Linux High Availability (for RHEL Server) - Extended Update Support
  - Red Hat Enterprise Linux High Availability - Update Services for SAP Solutions
  - Red Hat Enterprise Linux High Performance Networking (for RHEL Compute Node)
  - Red Hat Enterprise Linux High Performance Networking (for RHEL Server)
  - Red Hat Enterprise Linux High Performance Networking (for RHEL Server) - Extended Update Support
  - Red Hat Enterprise Linux Load Balancer (for RHEL Server)
  - Red Hat Enterprise Linux Load Balancer (for RHEL Server) - Extended Update Support
  - Red Hat Enterprise Linux Resilient Storage (for RHEL Server)
  - Red Hat Enterprise Linux Resilient Storage (for RHEL Server) - Extended Update Support
  - Red Hat Enterprise Linux Scalable File System (for RHEL Server)
  - Red Hat Enterprise Linux Scalable File System (for RHEL Server) - Extended Update Support
  - Red Hat Enterprise Linux Server
  - Red Hat Enterprise Linux Server - Extended Update Support
  - Red Hat Enterprise Linux Server - Update Services for SAP Solutions
  - Red Hat Enterprise Linux for ARM 64
  - Red Hat Enterprise Linux for ARM 64 Beta
  - Red Hat Enterprise Linux for Real Time
  - Red Hat Enterprise Linux for SAP
  - Red Hat Enterprise Linux for SAP Hana
  - Red Hat S-JIS Support (for RHEL Server) - Extended Update Support
  - Red Hat Software Collections (for RHEL Server)
  - Red Hat Software Collections Beta (for RHEL Server)
  - dotNET on RHEL (for RHEL Server)
  - dotNET on RHEL Beta (for RHEL Server)
You no longer have access to the repositories that provide these products.  It is important that you apply an active subscription in order to resume access to security and other critical updates. If you don't have other active subscriptions, you can renew the expired subscription.
Repository nagios-base is listed more than once in the configuration
Repository nagiosxi-deps is listed more than once in the configuration
Examining /tmp/nagiosupgrade/nagiosxi/nagiosxi-deps-el7-5.6.3-1.noarch.rpm: nagiosxi-deps-el7-5.6.3-1.noarch
Marking /tmp/nagiosupgrade/nagiosxi/nagiosxi-deps-el7-5.6.3-1.noarch.rpm as an update to nagiosxi-deps-el7-5.5.8-1.noarch
Resolving Dependencies
--> Running transaction check
---> Package nagiosxi-deps-el7.noarch 0:5.5.8-1 will be updated
---> Package nagiosxi-deps-el7.noarch 0:5.6.3-1 will be an update
--> Processing Dependency: php-imap for package: nagiosxi-deps-el7-5.6.3-1.noarch
--> Processing Dependency: ansible for package: nagiosxi-deps-el7-5.6.3-1.noarch
--> Running transaction check
---> Package ansible.noarch 0:2.8.1-1.el7 will be installed
--> Processing Dependency: python-httplib2 for package: ansible-2.8.1-1.el7.noarch
--> Processing Dependency: python-jinja2 for package: ansible-2.8.1-1.el7.noarch
--> Processing Dependency: python-paramiko for package: ansible-2.8.1-1.el7.noarch
--> Processing Dependency: python2-cryptography for package: ansible-2.8.1-1.el7.noarch
--> Processing Dependency: python2-jmespath for package: ansible-2.8.1-1.el7.noarch
--> Processing Dependency: sshpass for package: ansible-2.8.1-1.el7.noarch
---> Package php-imap.x86_64 0:5.4.16-9.el7 will be installed
--> Processing Dependency: libc-client.so.2007()(64bit) for package: php-imap-5.4.16-9.el7.x86_64
--> Running transaction check
---> Package ansible.noarch 0:2.8.1-1.el7 will be installed
--> Processing Dependency: python-jinja2 for package: ansible-2.8.1-1.el7.noarch
--> Processing Dependency: python2-cryptography for package: ansible-2.8.1-1.el7.noarch
---> Package libc-client.x86_64 0:2007f-16.el7 will be installed
---> Package python-httplib2.noarch 0:0.9.2-0.2.el7 will be installed
---> Package python-paramiko.noarch 0:2.1.1-0.10.el7 will be installed
--> Processing Dependency: python-cryptography for package: python-paramiko-2.1.1-0.10.el7.noarch
--> Processing Dependency: python2-pyasn1 for package: python-paramiko-2.1.1-0.10.el7.noarch
---> Package python2-jmespath.noarch 0:0.9.0-1.el7 will be installed
---> Package sshpass.x86_64 0:1.06-1.el7 will be installed
--> Finished Dependency Resolution
Error: Package: python-paramiko-2.1.1-0.10.el7.noarch (epel)
           Requires: python-cryptography
Error: Package: ansible-2.8.1-1.el7.noarch (epel)
           Requires: python2-cryptography
Error: Package: ansible-2.8.1-1.el7.noarch (epel)
           Requires: python-jinja2
Error: Package: python-paramiko-2.1.1-0.10.el7.noarch (epel)
           Requires: python2-pyasn1
 You could try using --skip-broken to work around the problem
 You could try running: rpm -Va --nofiles --nodigest
Loaded plugins: langpacks, product-id, search-disabled-repos, subscription-
              : manager
This system is registered with an entitlement server, but is not receiving updates. You can use subscription-manager to assign subscriptions.

*** WARNING ***
The subscription for following product(s) has expired:
  - MRG Realtime
  - Oracle Java (for RHEL Server)
  - Oracle Java (for RHEL Server) - Extended Update Support
  - RHEL for SAP (for IBM Power LE) - Update Services for SAP Solutions
  - RHEL for SAP - Extended Update Support
  - RHEL for SAP - Update Services for SAP Solutions
  - RHEL for SAP HANA - Extended Update Support
  - RHEL for SAP HANA - Update Services for SAP Solutions
  - Red Hat Ansible Engine
  - Red Hat Beta
  - Red Hat Container Development Kit
  - Red Hat Container Images
  - Red Hat Container Images Beta
  - Red Hat Developer Tools (for RHEL Server)
  - Red Hat Developer Tools Beta (for RHEL Server)
  - Red Hat Developer Toolset (for RHEL Server)
  - Red Hat EUCJP Support (for RHEL Server) - Extended Update Support
  - Red Hat Enterprise Linux Atomic Host
  - Red Hat Enterprise Linux Atomic Host Beta
  - Red Hat Enterprise Linux High Availability (for RHEL Server)
  - Red Hat Enterprise Linux High Availability (for RHEL Server) - Extended Update Support
  - Red Hat Enterprise Linux High Availability - Update Services for SAP Solutions
  - Red Hat Enterprise Linux High Performance Networking (for RHEL Compute Node)
  - Red Hat Enterprise Linux High Performance Networking (for RHEL Server)
  - Red Hat Enterprise Linux High Performance Networking (for RHEL Server) - Extended Update Support
  - Red Hat Enterprise Linux Load Balancer (for RHEL Server)
  - Red Hat Enterprise Linux Load Balancer (for RHEL Server) - Extended Update Support
  - Red Hat Enterprise Linux Resilient Storage (for RHEL Server)
  - Red Hat Enterprise Linux Resilient Storage (for RHEL Server) - Extended Update Support
  - Red Hat Enterprise Linux Scalable File System (for RHEL Server)
  - Red Hat Enterprise Linux Scalable File System (for RHEL Server) - Extended Update Support
  - Red Hat Enterprise Linux Server
  - Red Hat Enterprise Linux Server - Extended Update Support
  - Red Hat Enterprise Linux Server - Update Services for SAP Solutions
  - Red Hat Enterprise Linux for ARM 64
  - Red Hat Enterprise Linux for ARM 64 Beta
  - Red Hat Enterprise Linux for Real Time
  - Red Hat Enterprise Linux for SAP
  - Red Hat Enterprise Linux for SAP Hana
  - Red Hat S-JIS Support (for RHEL Server) - Extended Update Support
  - Red Hat Software Collections (for RHEL Server)
  - Red Hat Software Collections Beta (for RHEL Server)
  - dotNET on RHEL (for RHEL Server)
  - dotNET on RHEL Beta (for RHEL Server)
You no longer have access to the repositories that provide these products.  It is important that you apply an active subscription in order to resume access to security and other critical updates. If you don't have other active subscriptions, you can renew the expired subscription.
Repository nagios-base is listed more than once in the configuration
Repository nagiosxi-deps is listed more than once in the configuration
Cleaning repos: epel nagios-base nagiosxi-deps
Cleaning up everything
Maybe you want: rm -rf /var/cache/yum, to also free up space taken by orphaned data from disabled or removed repos
Loaded plugins: langpacks, product-id, search-disabled-repos, subscription-
              : manager
This system is registered with an entitlement server, but is not receiving updates. You can use subscription-manager to assign subscriptions.

*** WARNING ***
The subscription for following product(s) has expired:
  - MRG Realtime
  - Oracle Java (for RHEL Server)
  - Oracle Java (for RHEL Server) - Extended Update Support
  - RHEL for SAP (for IBM Power LE) - Update Services for SAP Solutions
  - RHEL for SAP - Extended Update Support
  - RHEL for SAP - Update Services for SAP Solutions
  - RHEL for SAP HANA - Extended Update Support
  - RHEL for SAP HANA - Update Services for SAP Solutions
  - Red Hat Ansible Engine
  - Red Hat Beta
  - Red Hat Container Development Kit
  - Red Hat Container Images
  - Red Hat Container Images Beta
  - Red Hat Developer Tools (for RHEL Server)
  - Red Hat Developer Tools Beta (for RHEL Server)
  - Red Hat Developer Toolset (for RHEL Server)
  - Red Hat EUCJP Support (for RHEL Server) - Extended Update Support
  - Red Hat Enterprise Linux Atomic Host
  - Red Hat Enterprise Linux Atomic Host Beta
  - Red Hat Enterprise Linux High Availability (for RHEL Server)
  - Red Hat Enterprise Linux High Availability (for RHEL Server) - Extended Update Support
  - Red Hat Enterprise Linux High Availability - Update Services for SAP Solutions
  - Red Hat Enterprise Linux High Performance Networking (for RHEL Compute Node)
  - Red Hat Enterprise Linux High Performance Networking (for RHEL Server)
  - Red Hat Enterprise Linux High Performance Networking (for RHEL Server) - Extended Update Support
  - Red Hat Enterprise Linux Load Balancer (for RHEL Server)
  - Red Hat Enterprise Linux Load Balancer (for RHEL Server) - Extended Update Support
  - Red Hat Enterprise Linux Resilient Storage (for RHEL Server)
  - Red Hat Enterprise Linux Resilient Storage (for RHEL Server) - Extended Update Support
  - Red Hat Enterprise Linux Scalable File System (for RHEL Server)
  - Red Hat Enterprise Linux Scalable File System (for RHEL Server) - Extended Update Support
  - Red Hat Enterprise Linux Server
  - Red Hat Enterprise Linux Server - Extended Update Support
  - Red Hat Enterprise Linux Server - Update Services for SAP Solutions
  - Red Hat Enterprise Linux for ARM 64
  - Red Hat Enterprise Linux for ARM 64 Beta
  - Red Hat Enterprise Linux for Real Time
  - Red Hat Enterprise Linux for SAP
  - Red Hat Enterprise Linux for SAP Hana
  - Red Hat S-JIS Support (for RHEL Server) - Extended Update Support
  - Red Hat Software Collections (for RHEL Server)
  - Red Hat Software Collections Beta (for RHEL Server)
  - dotNET on RHEL (for RHEL Server)
  - dotNET on RHEL Beta (for RHEL Server)
You no longer have access to the repositories that provide these products.  It is important that you apply an active subscription in order to resume access to security and other critical updates. If you don't have other active subscriptions, you can renew the expired subscription.
Repository nagios-base is listed more than once in the configuration
Repository nagiosxi-deps is listed more than once in the configuration
Examining /tmp/nagiosupgrade/nagiosxi/nagiosxi-deps-el7-5.6.3-1.noarch.rpm: nagiosxi-deps-el7-5.6.3-1.noarch
Marking /tmp/nagiosupgrade/nagiosxi/nagiosxi-deps-el7-5.6.3-1.noarch.rpm as an update to nagiosxi-deps-el7-5.5.8-1.noarch
Resolving Dependencies
--> Running transaction check
---> Package nagiosxi-deps-el7.noarch 0:5.5.8-1 will be updated
---> Package nagiosxi-deps-el7.noarch 0:5.6.3-1 will be an update
--> Processing Dependency: php-imap for package: nagiosxi-deps-el7-5.6.3-1.noarch
--> Processing Dependency: ansible for package: nagiosxi-deps-el7-5.6.3-1.noarch
--> Running transaction check
---> Package ansible.noarch 0:2.8.1-1.el7 will be installed
--> Processing Dependency: python-httplib2 for package: ansible-2.8.1-1.el7.noarch
--> Processing Dependency: python-jinja2 for package: ansible-2.8.1-1.el7.noarch
--> Processing Dependency: python-paramiko for package: ansible-2.8.1-1.el7.noarch
--> Processing Dependency: python2-cryptography for package: ansible-2.8.1-1.el7.noarch
--> Processing Dependency: python2-jmespath for package: ansible-2.8.1-1.el7.noarch
--> Processing Dependency: sshpass for package: ansible-2.8.1-1.el7.noarch
---> Package php-imap.x86_64 0:5.4.16-9.el7 will be installed
--> Processing Dependency: libc-client.so.2007()(64bit) for package: php-imap-5.4.16-9.el7.x86_64
--> Running transaction check
---> Package ansible.noarch 0:2.8.1-1.el7 will be installed
--> Processing Dependency: python-jinja2 for package: ansible-2.8.1-1.el7.noarch
--> Processing Dependency: python2-cryptography for package: ansible-2.8.1-1.el7.noarch
---> Package libc-client.x86_64 0:2007f-16.el7 will be installed
---> Package python-httplib2.noarch 0:0.9.2-0.2.el7 will be installed
---> Package python-paramiko.noarch 0:2.1.1-0.10.el7 will be installed
--> Processing Dependency: python-cryptography for package: python-paramiko-2.1.1-0.10.el7.noarch
--> Processing Dependency: python2-pyasn1 for package: python-paramiko-2.1.1-0.10.el7.noarch
---> Package python2-jmespath.noarch 0:0.9.0-1.el7 will be installed
---> Package sshpass.x86_64 0:1.06-1.el7 will be installed
--> Finished Dependency Resolution
Error: Package: python-paramiko-2.1.1-0.10.el7.noarch (epel)
           Requires: python-cryptography
Error: Package: ansible-2.8.1-1.el7.noarch (epel)
           Requires: python2-cryptography
Error: Package: ansible-2.8.1-1.el7.noarch (epel)
           Requires: python-jinja2
Error: Package: python-paramiko-2.1.1-0.10.el7.noarch (epel)
           Requires: python2-pyasn1
 You could try using --skip-broken to work around the problem
 You could try running: rpm -Va --nofiles --nodigest
[root@pstvmpkimon02 nagiosxi]#
Further help will be appreciated
Locked