Switch monitoring wizard no bandwidth data for ports

[abrist]

If the 2.0 version created the rrds incorrectly, you should get errors in the perfdata logs:

Code: Select all

tail -25 /usr/local/nagios/var/perfdata.log
tail -25 /usr/local/nagios/var/npcd.log

[ctmoney]

I did uninstall the 2.0 wizard, remove all of the old configs for 2.0, then install the 1.7 wizard and then re-add the switches.

/usr/local/nagios/var/perfdata.log does not exist

Here is the output for tail -25 /usr/local/nagios/var/npcd.log

Code: Select all

[02-19-2014 09:44:02] NPCD: HINT: load_threshold is enabled - ('10.000000')
[02-19-2014 14:28:03] NPCD: Caught Termination Signal - Hasta la vista... baby
[02-19-2014 14:28:28] NPCD: npcd Daemon (0.4.14) started with PID=1391
[02-19-2014 14:28:28] NPCD: Please have a look at 'npcd -V' to get license information
[02-19-2014 14:28:28] NPCD: HINT: load_threshold is enabled - ('10.000000')
[02-19-2014 17:03:37] NPCD: Caught Termination Signal - Hasta la vista... baby
[02-19-2014 17:34:51] NPCD: npcd Daemon (0.4.14) started with PID=1390
[02-19-2014 17:34:51] NPCD: Please have a look at 'npcd -V' to get license information
[02-19-2014 17:34:51] NPCD: HINT: load_threshold is enabled - ('10.000000')
[02-20-2014 09:46:01] NPCD: Caught Termination Signal - Hasta la vista... baby
[02-20-2014 09:46:26] NPCD: npcd Daemon (0.4.14) started with PID=1399
[02-20-2014 09:46:26] NPCD: Please have a look at 'npcd -V' to get license information
[02-20-2014 09:46:26] NPCD: HINT: load_threshold is enabled - ('10.000000')
[02-20-2014 09:57:27] NPCD: Caught Termination Signal - Hasta la vista... baby
[02-20-2014 09:57:50] NPCD: npcd Daemon (0.4.14) started with PID=1395
[02-20-2014 09:57:50] NPCD: Please have a look at 'npcd -V' to get license information
[02-20-2014 09:57:50] NPCD: HINT: load_threshold is enabled - ('10.000000')
[02-20-2014 10:01:21] NPCD: Caught Termination Signal - Hasta la vista... baby
[02-20-2014 10:35:46] NPCD: npcd Daemon (0.4.14) started with PID=29508
[02-20-2014 10:35:46] NPCD: Please have a look at 'npcd -V' to get license information
[02-20-2014 10:35:46] NPCD: HINT: load_threshold is enabled - ('10.000000')
[02-20-2014 10:36:22] NPCD: Caught Termination Signal - Hasta la vista... baby
[02-20-2014 10:36:45] NPCD: npcd Daemon (0.4.14) started with PID=1395
[02-20-2014 10:36:45] NPCD: Please have a look at 'npcd -V' to get license information
[02-20-2014 10:36:45] NPCD: HINT: load_threshold is enabled - ('10.000000')

[lmiltchev]

It seems like we will have to schedule a remote session to further troubleshoot your problem. Is this an option for you? If it is, email us at [email protected]. Thanks!

[ctmoney]

Sounds good. Thanks!

[tmcdonald]

Going to close this thread for now since you're going to start a ticket with us.